- Lightweight
- Impact Resistant
- Easy to Install
- Code : Luxxus
- Style : Classic
- Material : Polyurethane
Width : 3 9/16"
Height : 8 11/16"
Depth: 2 3/4"
1. SURFACE - CEILING - WALL
2. WORKING CONDITIONS
Storage & Installation conditions for Orac Decor products and Decofix.
Place profiles & adhesives at room temperature 24 hrs before installation.
Use Decofix Pro for porous or Decofix Hydro for non-porous surfaces.
Extra attention for glues on wallpaper !!!
Preferably use DecoFix Hydro & Decofix Extra for new-build projects.
Adhesion of paint or plaster on wall must be perfect
When in doubt about surface, please contact Orac.
Only full guarantee with Decofix.
3. GLUES
 
|
DecoFix Pro
FDP500 310ml
FDP600 4200ml
|
- Strong,water-based acrylic glue
- Long-lasting seal between mouldings and the wall and/or ceiling
- For interior applications and porous surfaces ( not for humid spaces or outside)
- Remove with humid sponge or cloth
- Should be kept frost free
|
 
|
DecoFix Extra
FX200 310ml
FX210 80ml
|
- Polyurethane-based glue
- Seam joints between the mouldings
- Remove excess glue before hardening ( max. 1 hours and repeat after 2-3 hours)
- Clean with acetone or Synth Thinner
- Can be painted after 24 hrs
- The more humidity, the faster the drying time
|
 |
DecoFix Hydro
FDP700 290 ml
|
- Extra strong MS polymer glue
- For exterior applications, damp environments, non-porous surfaces (tiles, glass, ...)
- Remove with soap solution
|
4. INSTALLATION
Inner Corner
Outer Corner
NOTES TO REMEMBER:
- Joints have to be dust free.
- Use DecoFix Hydro for exterior applications, humid areas, non-porous surfaces and for newly build houses with high humidity and low temperature
- DecoFix Pro or Hydro should be used over the complete length of the profiles and the full width of the gluing area
- The V-Fix is only for guiding the nozzle
- Push products firmly and evenly against the wall and ceiling ( every 10 cm)
- Use stainless steel nails to support bigger profiles and indirect-lighting profiles.
- Use DecoFix Extra in every joint (not only for corners) on one side of the profiles already installed.
- Apply enough DecoFix Extra; excess must come out of the front and the back.
- Wipe of with acetone or similar product.
